Measurements & Sizing

Ring Sizing

It is preferred that you get your finger measured at a jeweller, but if you have a ring that fits you can measure that as follows:

1. Place a ruler across your ring and measure the inside diameter of your ring in mm. Make sure that the "0" mark and end mark is just on the inside of the ring.

2. Place your ring flat on a piece of paper and trace the inner circle with a sharp pencil. Next, draw a line halfway through the circle and measure the length of that line in mm

Use BOTH these methods and make sure you get to the same size

We use UK sizes according to the following size chart. In the above example (right), the diameter is 17.2 mm, which corresponds to the letter N. That is your ring size. 

Keep in mind that rings with a wide shank will sit tighter on the finger than thin ring bands, they need to be 1-2 sizes bigger than your normal measurement. Notify the jeweller that you want your size for a wide band. Note that there is a resizing charge for incorrect sizes supplied

 

 

Chain Lengths

We stock the following standard chain lengths:

40cm, 45 cm, 50cm, 60cm